Okay, so this time, I'm posting something a bit different. This is not a blog entry, it is in fact a review of my sparkly new camera tripod. If you're into photography, this may be of help. If not, you can skip this one, you won't have missed anything. Anyway, let's begin.
One thing I've noticed through researching on the internet, is that there's not a lot to be said about Micansu's T700 Tripod. That's not to say that people don't think highly of it, there's literally nothing out there about this tripod.
So today's entry, is a quick review of the tripod, which arrived this morning.
First Impressions: The package from Micansu (actually vistarex) arrived well wrapped and securely packaged. The postage was reasonably quick, ordered on the sunday evening, arrived on the wednesday,
All documents enclosed.
The first thing that I noticed about the thing was the weight - over three kilos, this is a substantial tripod. Take the head out of the box (boxed seperatley) and you're left with a nice little (if somewhat...
budget appearance) carrying bag. This will come in useful so you don't have to carry the thing around in your hands.
Feet: The tripod comes with feet fitted, nodescript but substantial rounded plastic feet that will probably do the job, but don't inspire faith. Not to worry though, as it is also packaged with a bag of bits, that on closer inspection appeared to be a trio of spare feet - these are much more substantial and work in a ball-and-socket type arrangement to keep the feet level on the floor regardless of how rugged the surface is, By screwing the feet inwards, you expose the rather pointy metal spikes at the tips, designed to dig into soft surfaces and again, keep your camera expensive side up. They're a bit fiddly, but certainly look sturdy.
Legs: The body of the tripod itself is made from extruded aluminium, and the top of the legs are covered in a rather nice foam sort of material, which means it's reasonably comfortable to drag around, and you won't burn/freeze your hands on the metal if you're shooting in hot/cold weather. You notice on your first glance how sturdy the tripod looks, even when it's fully extended, and this is a tall tripod, at over 70 inches fully extended, with center column in the lowest position. With the column in the highest position, the camera is some 7 and a half foot above the ground, which is more than high enough for even the tallest photographers (and actually feels a bit precarious when it's balancing up there. But the sturdiness of the tripod isn't compromised, and it's still rock steady. The legs are also adjustable independently, and while most budget tripods will have all three of the legs linked to the center column, with the T700 you can spread the legs out until they're almost horizontal, and each leg will lock into one of four positions - good for extra stability, I imagine,
Center Column: Unlike my old tripod which used a rack and pinion type arrangement to raise and lower the center column (which had the advantage of being quickly and accurately adjustable, but which spun the control lever around at a frightening rate when you wanted to lower the camera again, frequently jamming it under the legs and potentially causing you to drop the entire kaboodle), the center column in this tripod is again, a simple triangular section of extruded aluminium. It's secure though, and adjustable simply by using a lock nut which presses a pressure plate against the column (so you won't damage it). Unscrew the nut, slide the column to the height you need, and tighten the nut again. Simple.
This tripod however is much more versatile than its rack and pinion cousins, and allows you to actually slide out the entire center column, and re mount it upside down, so that the head of the tripod is in between the legs, and the camera dangles down from the center of the tripod instead of perching on top of it. This allows you to get the camera millimeters above the floor, for more versatility, and is accomplished by removing the security plate at the bottom of the column - a little triangular plate mounted into the column with a press stud type thingie, designed to stop the center column (and your camera) crashing to the floor. Again, very secure, very sturdy. Both ends of the column have a standard screw thread
(3/8) on the end, so that you could fit a head to either end. The end opposite the security plate however, has a substantial metal plate that the head could screw to, whereas the plate itself is just plastic. For this reason, I'm using the "top" end as the top.
The Head:I purchased the tripod with the optional Pan and Tilt head, on the basis that it's less fiddly than the ball head, which is also an option when you're buying.
The head actually ships in four bits - the head, and the three knob/lever thingies that screw into it. Instructions were provided, and the head was assembled quickly and easily. It has several controls, the foremost being the three levers. One controls horizontal panning, one controls vertical tilting in the front-back direction, and one controls side to side tilt, allowing you to tip the camera on its side from 90° at the left extreme, and 30° at the right. The vast majority of (if not all) of battery grips on the market have the controls at the right hand side, so tilting the camera to the right gives you full access those secondary controls in what is a natural and convenient position for taking portrait photos.
Both the side-side tilt, and the side-side pan have little reference markers on them, so you can see how far you're panning/tilting your camera, in degrees.
The head also includes a quick release plate, for those times when you need to get the camera off/on the tripod and capture that quick shot. The quick release plate also includes a small but effective safety catch, so you don't accidentally lose the camera off the top of the thing.
Complaints:The actual finishing is perhaps my only complaint about this tripod, and it's here that the T700 falls down a bit - just a bit, not a lot.
With the exception of the legs, which are finished in a black enamel/powder coat type finish, the majority of the exposed metal on the tripod is finished in an attractive dappled gunmetal finish. Unfortunatley, my tripod had evidently been knocked or caught by something, either at the factory or in transit, as in one area, a the finish was peeling off exposing bare metal underneath.
In addition, the reference markers on the head seem to be printed on some type of plasticard, and are stuck into place on the tripod - not a problem as this's how I'd expect them to be fitted, except on the side-side tilt reference marker, it's not been centered before being stuck on so it's a little off center. On this subject, as you may have noticed from earlier, there is no vertical tilt marker, and the side-side pan reference marker seems to have no corresponding reference point on the head itself. Also, with the head fitted, you will not actually be able to get the tripod in the little shoulder bag that it shipped in. Aftermarket bags are available, but it's irritating when you need to pay to replace something you already have. That said, you're not likely to lose the tripod out of the bag even with the head fitted, so it still serves its purpose.
My next complaint is that the factory didn't seem to spend any time cleaning the tripod up before shipping it out. Some parts of the tripod, particularly the head, were still covered in
swarf from the machining process, and if you were to get that on your camera, it could cause a great deal of damage to the lenses, the lcd screen, or worse, the sensor inside the camera if it got in while you were changing lenses. In addition, the joints of the camera/head, all the bearing surfaces are liberally lubricated with grease. Good, because it makes everything run smoothly, bad because they used more than they needed to and you're at risk of getting it on your camera.
My final complaint is that the feet, which were thoughtfully supplied with the tripod, are actually no good at all. This is not because of any deficiency in their design, but simply that so far, I have tried everything except taking tools to the tripod to get the existing useless plastic feet off, and they are absolutely not budging.
[Update: April 5th - I managed to get the old feet off the tripod - you have to push them off, not twist them off]VERDICT:FEATURES:Weight: 7.5lb/3.4Kg.Closed Length: 30 inches/76cm.Max Length: 76 inches/196cm.Quick release clips for easy leg adjustment.Independently positionable legs adjustable to four positions.Reversible center column with 3/8 Head mounting thread at each end.Non slip self-levelling feet, with spikes for soft surfaces.Quick release plate, with safety catch.Head is adjustable for 360° Left/Right pan, 135°Up/Down tilt (approx), and 120° Left/Right tilt.Spirit level indicator.Supports up to 6Kg/13.22lb. Pros:Looks great!Independantly positionable legs adjustable to four positions.Self levelling feet with spikes.
Quick release plate with safety catch.
Extremely sturdy.
Maximum height is greater than any photographer would ever need.
Cons:Sturdy construction means high weight.Finish poor in some areas.Factory installed feet will not come off, so can't fit self levelling feet.No vertical tilt angle indicator.Will not allow you to tilt the camera directly up at 90° to the horizontal - could be a problem when photographing the sky.
All in all, I am pleased with the tripod. It's extremely sturdy, very versatile. the head solidly locks the camera into position, while the quick release (and the safety catch that prevent its accidental use) is a boon to people that like to go quickly from mounted to hand-held photography. It is an attractive piece of kit, it looks the business too. While there are a few niggles with the overall finishing of the tripod, build quality seems reassuringly solid and you get a lot of versatility that you really don't expect at this price.
Most people have never heard of Micansu, which is a shame, as £70 will net you this tripod and your choice of head. For budding photographers who don't have the £250 most people like to spend on their tripods, this is a great alternative to the more expensive more established names. I am very happy with mine, and look forward to using it in future.
I'll happily recommend it to anyone.
Pictures (Linked to photobucket to be as 56k friendly as possible)
The tripod standing up, unextendedThe tripod at its maximum heightIndependently adjustable legsThe camera can be easily mounted on top of the tripodIt can also be easily mounted underneath, for macro shots etcThe finish is poor in places thoughThe adjustment guide on this one wasn't centered properlyToo much grease on the joints could cause problemsFin.